Sewage Ejector Pumps & Backwater Valves in Burr Ridge, IL
A basement bathroom or laundry sits below the sewer line, so waste can't flow out on gravity alone. A sewage ejector pump lifts it up to the main sewer, and a backwater valve stops the city sewer from pushing back into your home during a heavy storm. Ace Plumbing & Sewer installs, repairs, and replaces both across Burr Ridge and Downers Grove, so what goes down stays down and what's out on the street stays out there.
Trusted by homeowners across Burr Ridge and nearby suburbs
Warning Signs
Signs your ejector pump is failing
These systems tend to warn you before they fail, and failure means sewage where you least want it. Catch these early.
Gurgling or slow basement drains
A below grade toilet or drain that gurgles or empties slowly can mean the ejector pump is struggling to clear the pit.
Sewage odor in the basement
A persistent sewage smell often points to a failing ejector pump, a bad seal on the pit, or a venting problem.
Pump runs constantly or not at all
An ejector that never shuts off, or never kicks on when the pit fills, has a float, switch, or motor problem.
Backup during heavy rain
Sewage coming up through basement drains in a storm is the classic sign you need a backwater valve, or that the one you have has failed.
Loud or grinding noises
An ejector pump grinding or banging usually means a worn or jammed impeller, or debris that shouldn't be in the pit.
Repeated basement backups
A basement that backs up again and again during storms is telling you the sewer can push back in, and nothing is stopping it.
Water coming in from the ground rather than sewage backing up through the drains is a different system. That's our sump pumps and battery backup work.
Our Process
How we set it up to work right
The right pump or valve for your situation, installed and sealed properly, tested before we leave.
Assess the setup
We look at your below grade fixtures, your pit, and your sewer situation to recommend the right ejector pump, backwater valve, or both.
Right component, right spec
We match the ejector pump to your demand, or the backwater valve to your sewer line, so it handles what it needs to.
Install & seal
Ejector pits get sealed and vented correctly to keep odor and gas out; backwater valves go in where they'll actually stop a backup.
Test & confirm
We cycle the pump or valve, confirm it triggers and seals correctly, and make sure the system does its job before we go.
EJECTOR & BACKWATER SERVICES
Ejector and backwater work we handle
Two systems, one goal: keep sewage moving the right direction and keep the city sewer from coming back into your home.
Backwater Valves Matter in Burr Ridge and Nearby Suburbs
Sewer backups are a real and recurring problem across the western suburbs, and the cause is structural. When a major storm drops several inches of rain, the municipal sewer system can fill to capacity, and when it does, that water has to go somewhere. In a home without protection, the path of least resistance can be backward through your own sewer lateral and up out of the lowest drains in the house, which means the basement. A backwater valve is a one way gate installed in your sewer line: waste flows out normally, but the moment the city sewer tries to push back, the valve closes and holds. In flood prone neighborhoods with finished basements, it's one of the highest value pieces of protection you can install, and it works whether or not the power is on.
Sewage ejector pumps solve the opposite direction of the same below grade challenge. Any fixture installed below the level of your main sewer line, a basement bathroom, a laundry sink, a wet bar, can't drain on gravity, so an ejector pump collects that waste in a sealed pit and lifts it up to the sewer. When an ejector fails, you get odor, gurgling, slow drains, and eventually backup, so a sealed and properly vented pit with a reliable pump matters more than most homeowners realize until it stops working. If your problem is groundwater seeping in rather than sewage, that's a sump pump situation, and our sump pump and battery backup work covers it.
Why Ace Plumbing & Sewer
Why homeowners trust us with the messy jobs
We install it to actually work
A backwater valve in the wrong spot or an ejector pit that isn't sealed is worse than useless. We install both so they do the job when it counts.
We diagnose the real problem
Backup, odor, and gurgling have several possible causes. We find the actual one instead of guessing and hoping.
40+ years on western suburb sewers
We've handled ejector and backup problems in these neighborhoods since 1983. We know the sewer system here and how it fails.
COMMERCIAL SERVICE
Commercial Ejector & Backwater Systems in Burr Ridge & Nearby Suburbs
Any commercial building with below grade restrooms, a basement kitchen, or lower level fixtures depends on ejector pumps to move waste, and an ejector failure in a business means closed restrooms and a shut down. Ace Plumbing & Sewer installs, repairs, and maintains commercial ejector systems across Chicago's western suburbs, and we've done it since 1983. We size the system to the building's demand and keep it sealed and vented so odor never becomes a customer's problem.
Backwater protection matters just as much commercially. A sewer backup into a restaurant, retail floor, or occupied lower level is a serious event, and a properly installed backwater valve is inexpensive insurance against it. For property managers, we can assess a building's exposure and recommend where valves and reliable ejector systems belong before a storm makes the case for you.
We work around your operations and keep the site contained. See our full range of commercial plumbing services, or call (708) 204-8602 to talk it through.
FAQ
Ejector pump & backwater questions
Straight answers about ejector pumps, backwater valves, and keeping sewage where it belongs. Don't see yours? Just call.
What Ejector Pumps & Backwater Valves Cost in Burr Ridge & Downers Grove
The two systems price differently. A sewage ejector pump repair, a float or a switch, is at the low end, while a full ejector pump replacement with a new sealed pit is more involved. A backwater valve installation depends on where the valve goes and how accessible the sewer line is, since some installs are straightforward and others require cutting into a floor to reach the line. In every case the variables are the same: what the job actually requires, the condition of your existing setup, and access.
We quote it before we start. We assess your situation, tell you whether you need an ejector repair, a full replacement, a backwater valve, or some combination, and give you the number up front rather than a surprise later. And we'll be straight about priority: if a backup during storms is your real exposure, a backwater valve is the piece that protects you, and we'll say so plainly.
Call or text (708) 204-8602 for a quote. We answer 24/7, and a sewage backup or a failed ejector is an emergency we'll come out for the same day.
Request a free quote
Tell us what’s going on and we’ll get right back to you. Need help now? Call and a real plumber answers 24/7.